To maintain your rice bran oil machine, you need to follow some basic steps and precautions. Here are some tips for you:
1. Before starting the machine, check the oil level in the oil tank and the lubrication of each part. If the oil level is too low, add enough oil to avoid damage to the machine. If the lubrication is not good, apply grease or oil to the friction parts.
2. After starting the machine, let it run for a few minutes to warm up. Then adjust the temperature and pressure according to the requirements of the oil extraction process. The temperature and pressure should be stable and consistent throughout the process.
3. During the oil extraction process, monitor the quality and quantity of the oil and cake. If there is any abnormality, such as smoke, noise, or leakage, stop the machine immediately and find out the cause. If necessary, replace or repair the damaged parts.
4. After finishing the rice bran oil extraction process, turn off the machine and let it cool down. Then clean the machine thoroughly with a soft cloth or brush. Remove any residue or dirt from the machine and the oil tank. Do not use water or detergent to clean the machine, as it may cause rust or corrosion.
5. Store the machine in a dry and ventilated place. Avoid direct sunlight, moisture, or dust. Cover the machine with a cloth or plastic sheet to protect it from dust and insects.
By following these steps, you can ensure the smooth operation and long service life of your rice bran oil machine. For more information about rice bran oil production and machinery, you can visit Huatai Rice Bran Oil Machinery Website: https://ricebranoilpress.com/